Quick Access

0

HHT25SLTC

Details HHT25SLTC
The HHT25SLTC trimmer is powered by Honda’s GX25, Mini 4-stroke engine. Lighter, powerful and packed with innovative features, it includes a multi-strand drive cable that absorbs vibration and impacts. Other standard features include safety goggles, single loop shoulder harness, semi-matic (tap & go) trimmer head, heavy-duty drive clutch, electronic ignition for dependable starts, and low-tone muffler for quieter operation. WARRANTY As a testament to their quality and reliability, all Honda trimmers come with a warranty of 24 months for non-commercial use and 12 months for commercial use.
Engine type :
Mini 4-stroke; ohc; single cylinder air cooled multi-position (360°)
Honda engine model :
Gx25
Displacement :
25 cc (1.53 cid)
Bore and stroke :
35 x 26 mm (1.4 x 1.0 in)
Maximum net torque :
1.0 n•m (0.74 lbf-ft) @ 5;000 rpm
Idle speed :
3;100 ± 200 rpm
Max. no-load rpm (requires blade barrier) :
10;000 rpm
Ignition system :
Transistorized flywheel magneto (electronic)
Spark plug :
Cmr5h (ngk)
Cooling system :
Forced air
Starting system :
Recoil starter
Stopping system :
Ignition primary circuit ground
Carburetor :
Diaphragm type w/fuel pump
Recommended fuel :
Regular unleaded gasoline (87 octane)
Fuel primer :
Anti-flood type
Fuel capacity :
0.50 litre (17.6 fl. imp. oz)
Fuel consumption (approximate) :
0.5 litre/hr (0.11 imp. gal/hr)
Clutch drive type :
Centrifugal twin shoe-clutch
Clutch size :
54 mm (2 1/8 in) diameter
Clutch engagement :
4;200 ± 200 rpm
Air cleaner :
Semi-dry type
Lubrication system :
Oil mist
Oil capacity :
80 cc (2.82 fl. imp. oz)
Recommended oil :
Sae 10w30 api service classification sj or later
Handle type :
Loop
Throttle control type :
Two-motion trigger type
Engine stop switch :
Slide type switch
Cutting head (standard) :
Semi-matic line feed nylon (tap & go)
Cutting head (optional) :
Manual; pro-tap
Cutting width :
43.2 cm (17.0 in)
Line type :
Ultra-quiet
Cutting line diameter :
2.41 mm (0.095 in)
Anti-vibration system :
Standard
Drive shaft type :
Flexible steel cable
Final drive gear case :
Helical cut bevel gears / sealed ball bearings
Gear ratio :
1.235 input shaft: 1 (output shaft)
Main pipe diameter :
25.4 mm (1.0 in)
Main pipe thickness / material :
1.5 mm (.06 in) / aluminum
Trimmer guard with cutter :
Standard
Steel blade guard :
Optional
Shoulder harness :
Standard
Professional double loop harness :
Optional
Safety goggles (a.n.s.i std.) :
Standard
Blade :
Opt. (4-t x 22.9 cm / 9.0 in) steel brush cutting
Blade barrier kit :
Optional
Overall length with cutter mounted :
188.5 cm (74.2 in)
Overall width :
34.5 cm (13.6 in)
Overall height :
26.5 cm (10.4 in)
Dry weight without blades :
5.90 kg (13.0 lb)
Are you Interested in the HHT25SLTC?
Starting at  $ 389*
+ HST
New Vehicles

You do not have any vehicles selected

Select another new vehicle to compare

 New Vehicles to compare

New Inventory Vehicles

You do not have any vehicles selected

Select another new vehicle to compare

 New Inventory Vehicles to compare

Pre-Owned Vehicles

You do not have any vehicles selected

Select another Pre-owned to compare

 Pre-owned vehicles to compare